-
Home
- blog
THERMAL PROTECTION FOR ELECTRIC VEHICLES
Meeting the ever-increasing need for product safety and quality, as Asiatronix we provide a broad range of optimal safety solutions within thermal links, fuse for batteries, and microfuse up to 900V DC. Some highlights are thin body, high reliability, and excellent thermal sensibility.
Some applications are thin heater, dc/dc converters, power supply, and electronics applications.
- Fuse off the power path physically in need.
- Large current and high voltage rating, no required parallel use of the fuse.
BW12
- It realizes rated current 265A.
- It realizes the low height type which is 14mm or less.
- It can be cut off a circuit by signal current to the heater resistor when the abnormal status like over-charging.
(Resistor part is connected to the fuse part electrically so that fuse part can break contact of resistor part at a time.) - It is compliant with RoHS2.
Application: EV battery and Energy storage system
BW21
- It realizes rated current 480A.
- It can be cut off a circuit by signal current to the heater resistor when the abnormal status like over-charging.
- It realizes the low height type which is 18mm or less.
- It is compliant with RoHS2.
Application: EV battery and Energy storage system
FM
- It realizes rated voltage DC110V.
- It interrupts a circuit by signal current being applied from the signal terminal to heater resistor.
- It is also possible to protect a circuit against overcurrent and overheat.
- It is compliant with RoHS2 and Halogen free.
Application: Li-Ion battery pack (small energy storage, AGV, e-motor cycle,small EV, e-bike and power tools)
For technical information or FAQ ❮
The passive antenna is an antenna unit used to receive and transmit signals.
It is composed of metal parts and various types of dielectric materials.
The product does not including active circuit.
GSM/LTE/BT/WIFI/DSRC ANTENNA
Communication antenna is mainly used for receiving and transmitting wireless communication signals, the antennas including 2G/3G/4G antennas, WIFI antennas, Bluetooth antennas, etc.
Its characteristics are simple structure, excellent performance.
| Product Name | Center Frequency (MHz) | Efficiency (%) | Gain (dB) | Size (mm) |
|---|---|---|---|---|
| PAM2450NN | 2400-2500 | 75 | 1.5 | 35.7x6.8 |
| GSM_PAI_900-1800A | 880-960/1710-2170 | 50/65 | 1.5 | 24x5.5x4.4 |
| DAI900-1800B | 890-960/1710-1880 | 28/49 | 2 | 17x11x2 |
| DAS5800R12C13 | 5850-5925 | 80 | 3.5 | 12x12x3 |
| DAS5800R25C14 | 5850-5925 | 85 | 5 | 25x25x4 |
| DAS2450R36C16 | 2400-2483.5 | 85 | 5 | 36x36x6 |
| DAS2450R25V4 | 2450 | 85 | 4.5 | 25x25x4 |
GNSS ANTENNA
GNSS antenna used for the reception of satellite signals, and provides corresponding satellite signals to GNSS products.
The antenna including GPS antenna, BD system antenna, GLONASS antenna and satellite broadcast radio antenna, etc.
| Product Name | Center Frequency (MHz) | Band Width (MHz) | Gain (dB) | Size (mm) |
|---|---|---|---|---|
| GGL2-36H325H4-JHY05 | GPS:L1, L2 GLONASS: G1 | 3dBi @Zenith | 3 | 36×36×3, 25×25×4 |
| DAD1590R3C4504 _ A07 | GPS:L1, GLONASS: G1 | 25 | 3dBi @Zenith | φ45×4 |
| DAS1582R36D36 | 1561/ 1575/ 1602 | ≥20 | 4 | 36x36x6 |
| DAS1595R25D14 | 1575/1602 | ≥15 | 4 | 25x25x4 |
| DAS1575R25C14 | 1575 | ≥5 | 4 | 25x25x4 |
| DAS1575R25C32 | 1575 | ≥5 | 2 | 25x25x2 |
| DAS1575R20D34 | 1575 | ≥5 | 3 | 20x20x4 |
| DAS1575R18C14 | 1575 | ≥10 | 2 | 18x18x4 |
| DAS1575R18C12 | 1575 | ≥5 | 0 | 18x18x2 |
| DAS1575R15C14 | 1575 | ≥5 | 0 | 15x15x4 |
| DAS1575R15E52 | 1575 | ≥5 | 1.0 | 15x15x2 |
| DAS1575R12C14 | 1575 | ≥5 | -1.0 | 12x12x4 |
| DAS1575R12D32 | 1575 | ≥4 | - 1.0 | 12x12x2 |
| DAS1575R10I54 | 1575 | ≥5 | - 2.0 | 10x10x4 |
| DAA1575R09K14 | 1575 | ≥5 | - 3.0 | 9x9x4 |
TAG ANTENNA
Tag antenna is mainly used in the anti-metal tag, and the product can obtain better performance in the metal environment.
Currently the working frequency of products is mainly focus on UHF band.
READER ANTENNA
Reader antenna is mainly used in all kinds of Handheld, fixed reader system, and the characteristics of the product is small size, high reliability, easy to integrate with reader system, Currently the working frequency of products is mainly focus on UHF frequency band.
For technical information or FAQ ❮
GLEAD’s Antenna products mainly includes GPS /BEIDOU /GLONASS antenna, European Standard and American Standard DAB antenna, 2G /3G /4G communication antenna, UHF band reader antenna, anti-metal tag antenna and antenna products used in special industry such as base station timing, high precision measurement. The antenna products are mainly used in satellite navigation, satellite positioning and satellite communications.
It also provides products for wireless communications and IOT. GLEAD’s GPS/BD antenna has been included in the national Torch Plan High-tech Products. The automotive antenna products have passed TS16949 system.
BMG is a product encapsulated by self-developed ultra-thin gas discharge tube and varistor in series.
Fully compatible with the existing MOV pad size.
The BMG products provided to customers are from 7mm~20mm diameter, surge rating from 1KA to 5KA, the maximum continuous working voltage is 70VAC~600VAC, and the working environment temperature supports -40℃~105℃.
Compared with a simple varistor, BMG has the following advantages:
Improved AC voltage withstand
The varistor is connected in series with the gas discharge tube. Due to the large difference in static impedance between the two, most of the voltage is applied to both ends of the GDT, which determines that the starting
impulse break over voltage of the protection circuit .Impulse breaking voltage is determined by GDT, not MOV.
Improved residual voltage of the design
Due to the high-impulse break down voltage of GDT connected in series, the MOV only needs to be responsible for protecting working voltage.
So the varistor voltage of the design can be reduced. For example, in the AC220V circuit, the original configuration Choose 470V MOV, or even 560V MOV.
When choosing BMG products, the corresponding varistor voltage can be 330V or 390V to meet the needs of low platform residual voltage.
Effective cut off the leakage current of MOV in parallel in the circuit
Due to the addition of GDT, the leakage current of BMG is very small, less than 0.1μA, before the breakdown state is reached, so the sensitive leakage current loop is cut off.
The conventional varistor can only reach the μA level when it is 0.75*V@1mA, but if the power grid fluctuates, it may reach a larger leakage current. And speed up aging of the MOV and may even catch up fire.
Failure mode of BMG module is obvious
Based on large number of tests, having the GDT connected in series, the failure mode is probably MOV wear out failure, and there is very small probability for BMG hybrid for catching fire or combustion because of the GDT in serie connection with MOV.
With BMG product family you have more advanced surge protection
Having hybrid protection based design where you combine the discrete GDT and MOV design in one capsule. This solution where GDT cuts off leakage currents of the MOV and prevents from premature failure of the MOV device.
- BMG protectors offer higher reliability and longer life time of the protection circuit, more controlled end-of-life failure of the circuit.
- Using a hybrid protection device you will save PCB area
- To reach BMG surge protection level using only MOV you do need to select a larger size of MOV for the circuit.
- BMG devices offer improved level of safety against major surge voltage threats, less blowing fuses and breaker failures compared to MOV
- Using ultra-thin gas discharge tube, the overall thickness is slightly increased, but it can be completely pin to pin compatible with the original mov size-sensitive package and pins distance.
- The product has passed UL1449 certification and is in line with RoHS certification.
BMG family product selection quid for 1kA,2kA, 3kA and 5kA 8/20 uS rated product families is available .
The product has passed UL1449 certification and is in line with RoHS certification
High mechanical reliability with 5000 mating cycles and robust locking feature.
- Increased port density compared to RJ45
- High data rate performance for 10G Ethernet, with PoE capability
- Excellent EMI protection for noisy environments
- Robust 2 point metal latches for secure mating
- Fully intermateable with ix Industrial™ products from other authorized vendors
Together with our sister company CS ORVEM, we can give you support solution for ix Industrial™ patch cable.
Fully shielded for demanding applications, including factory automation & robotics, datacenters, security systems, transportation.
For technical information or FAQ ❮
We are our customers point of reference, developing design-in and giving technical support, in close collaboration with our customers to create the most innovative, reliable and cost effective products and reach the success together.
CUSTOMER CARE
Send us a request to sales@asiatronix.com
or contact us for technical information, cross reference, stock availability or requests of quotation.
CONTACTS
ASIATRONIX SRL
Via Sacco e Vanzetti 34 |20099 Sesto San Giovanni (MI) Italy | IT04915880969
