From December 20, 2020, manufacturers and suppliers must ensure that their audio/video (AV) devices and information and communication technology components comply with the new EN 62368-1 standard. This new, revised standard contains safety-related regulations and replaces the standards IEC/EN 60065 and IEC/EN 60950-1

This applies both to units in the devices, such as power supply modules, and to external power packs that are simply included with the devices.

 

In order to ensure protection against electric shock, different methods and techniques are described in the new standard. The IEC 62368-1 defines certain high-voltage tests (HiPot tests) depending on the mains voltage used for the device. That is, for example, 1.5kV for 120VAC or 2.5kV for 230VAC. These values ​​are decisive when dimensioning the gas discharge tube between PE and L/N.

 

Likewise, the devices or subsystems to be certified may only have certain residual voltages after being subjected to voltage pulses (surge, eg 1.2/50-8/20μs 6kV) in order to ensure protection against overvoltage. This generally requires gas arresters with ignition voltages triggered by the HiPot test. For these reasons, the arrester is separated from PE during the HiPot test, which means an increased, mostly manual effort.

 

To avoid this, the BXD series gas arrester was specially developed. The HiPot test can be carried out after assembly without any additional effort. At the same time, the requirements for overvoltage protection are met.

 

Key Features

  • Breakdown voltage (100V/s): 2,400-4,800V
  • Surge discharge current: 3,000A
  • Ignition voltage (1kV/µs): ≤ 2,500V
  • For HiPot test ≥1,500V AC or ≥2,000V AC
  • Size design: 9,0 *5,5 *7,0mm or 8,8 *6,2 *8,7mm
  • High current endling capability 3kA @8/20 µs

Applications:

  • Computer and network components
  • Consumer electronics, audio/video
  • Telecommunications and network infrastructure
  • Led luminaries
  • Power supply units
Technical data and testing results available.
 
 
Protection solutions: 
 
 
 
 

For technical information or FAQ

 
 
 
THERMAL LINKS

E2 Series

・It has superior thermal sensitivity that suitable for the overheat protection of the parts.
・Extremely thin body as 1.1 mm thickness ensures reliability.
・It is a non-resettable thermal link that uses a fusible alloy for its thermal element.
・It is compliant with RoHS2.

 

Application: thin heater for auto and auto mobile

 

ETR

・It has superior thermal sensitivity that suitable for the overheat protection of the parts.
・Extremely thin body as 1 .1 mm thickness ensures reliability as well as reduces deterioration with age.
・It is thermal links with tab terminals can be used for spot welding.
・It is a non-resettable thermal link that uses a fusible alloy for its thermal element.
・It is compliant with RoHS2.

 

Application: battery cell and battery pack

 
 
 

Micro fuse

KB series

・It realizes fast acting and high voltage rating of 450V DC being micro size type that each side of body is 10mm or less.
・It can be mounted to printed circuit board by flow-soldering.
・It is compliant with RoHS2 and lead(Pb) free.

 

Application: DC motor, DC-DC converter and battery pack

 
 
 

Current fuse with resistor

FV

・It interrupts a circuit by signal current being applied from the signal terminal to heater resistor.
・It is also possible to protect a circuit against overcurrent and overheat.
・It is compliant with RoHS2 and Halogen free.

 

Application: Li-Ion battery pack (small energy storage, AGV, e-motor cycle,small EV and e-bike)

 
  

 

For technical information or FAQ

 
 
 
Technical specifications overview
 
Main Products
 
 Circuit Protection Solutions
 
 
EV Applications
 
Wind Power Solutions
 
PV Solutions
 
ESS Solutions
 
 
Home Appliance Solutions-Microfuse
  
 
 
Industrial Circuit Protection Solutions
 
 
 
 

For technical information or FAQ

 
 

Speaking instead of active antennas, these are available in different characteristics (GPS, GLONASS, BEIDOU, GALILEO) in which compared to the passive antenna, in addition to the antenna element, there is also an LNA amplification circuit and a power supply circuit. Thanks to this combination, the satellite signal is received, amplified and filtered from background noise, offering high gain, low noise factor and low power consumption.

Mounting to the target surface can be either adhesive or magnet.


Appearance:

 
Specifications
Frequency range GPS: L1; 4G
DC voltage 3.0-5.0V
Gain 28 ± 3
V.S.W.R. 2.0:1
Noise Figure 1.5dB
DC Current 11mA a 3.3V
Impedence 50 ohm
RF cable lengthen L=3m/5m or others
RF connector SMA/FAKRA/GT5 or others
Mounting Magnetic/adhesive mounting
 
 
Center frequency (MHz) Working voltage (V) Amplifier Gain (dB) Size (mm) 
BD:B1B2B3, GPS:L1L2L5, GLONASS:G1G2 3.0-16.0  38±3 Φ148x60
BD:B1, GPS:L1, GLONASS:G1 3.0-5.0   38±3 Φ110x105
BD:B1, GPS:L1,  3.0-5.0    38±3 Φ96x126
BD:B1, GPS:L1, 3.0-5.0    28±3 Φ80x103
BD:B1, GPS:L1, GLONASS:G1 3.0-5.0   28±3  55.4x43.9x16.7
GPS:L1, MIMO 4G 3.0-5.0   28±3  124x52.5x24
BD:B1, GPS:L1, GLONASS:G1 3.0-16  28±3 φ25x51 
GPS:G4 3.0-5.0  28±3 79x29x11
GPS:3G 3.0-5.0  28±3 φ52x15 
GPS/GLONASS: 3G 3.0-5.0  28±3 φ75x14.2 
 

For technical information or FAQ

 
 
 

We have a wide selection of high quality solutions for different sectors:

 

 

FANS IN INDUSTRIAL SECTOR

  • Robust & High Reliability Cooling Fan & Blower
  • Smart Control by NTC & Software
  • IP x7 Technology Support
  • 5VDC-48VDC, 25mm-172mm.
  • EC Series: 100VAC-230VAC

Applications

  • Medical/ Military Communication/ Peoples Livelihood/ Architecture

Major Specifications

  • AC to DC Dimension: 80mm & 245mm. ( Axial)
  • Water Proof Design
  • EC FAN
  • High Operating Voltage
  • Water Proof Design
  • Soft Start up & Hot Swappable support

Engineering Support:
1. ISO Industrial Standard.
2. Anti-vibration & Anit-noise support
3. Smart Control with MCU
4. IP x2 ~ IP x7
5. UL, CSA, TUV, VDA(option)
6. Customized Engineering Design

 

 

 

FANS IN GREEN POWER & ELECTRICITY SECTOR

  • Energy Saving Brushless DC Cooling Fan & Blower
  • High Performance & Reliability
  • IP x7 Technology Support
  • 12VDC-48VDC

Applications

  • Solar energy/Wide energy PV Inverter
  • Energy Storage System(ESS)
  • Electric vehicle Battery module/ DC Charger
  • UPS

Major Specifications

  • Soft Start up & Hot Swappable support
  • Water Proof Design

Engineering Support:
1. ISO Industrial Standard.
2. Anti-vibration & Anit-noise support
3. Smart Control with MCU
4. IP x2 ~ IP x7
5. UL, CSA, TUV, VDA (option)
6. Customized Engineering Design

 

 

FANS IN TELECOM & DATA CENTER/STORAGE SECTOR

  • De-Vibration & Ultra Silence Cooling Fan & Blower
  • Smart Control by NTC & Software
  • High Performance & Reliability
  • 5VDC-48VDC, 40mm-172mm.

Applications

  • Cloud & Telecom
  • (Macrocell)/ Data Center
  • (Router)/(Switch)/(Hub)/(SERVER)
  • Storage/ Network Attached Storage/UPS

Major Specifications

  • High Operating Voltage(Max. Operating Voltage 75VDC for 48VDC Rated. )
  • Water Proof Design
  • Soft Start up & Hot Swappable support

Engineering Support:
1. ISO Industrial Standard.
2. Anti-vibration & Anit-noise support
3. Smart Control with MCU
4. IP x2 ~ IP x7
5. UL, CSA, TUV, VDA(option)
6. Customized Engineering Design

 

ALL OUR FANS ARE AVAILABLE ALREADY CABLED WITH A WIDE SELECTION OF CONNECTORS.
 
 
 

THERMAL PADS AND COMPONENTS FOR THERMAL INSULATION

Orvem thermal components are composed of high-performance elastomer insulation material with a special film as the base.

Thermal pads are available in different types:

Silicone (insulated)

Non-silicone

Carbon fiber (with electrical conductivity as well)

 

 
 
 
 
 
 
 
 
 The thermal conductivity value ranges from 2 W/mk to 40 W/mk. In addition, thermal gel, and adhesive thermal tapes are available.
 
 
 

For technical information or FAQ

 
 
 

We are our customers point of reference, developing design-in and giving technical support, in close collaboration with our customers to create the most innovative, reliable and cost effective products and reach the success together.

 

CUSTOMER CARE

Send us a request to sales@asiatronix.com

or contact us for technical information, cross reference, stock availability or requests of quotation.

 

CONTACTS

ASIATRONIX SRL

Via Sacco e Vanzetti 34 |20099 Sesto San Giovanni (MI) Italy | IT04915880969   

+39 0224304651

 

Wir benutzen Cookies

Wir nutzen Cookies auf unserer Website. Einige von ihnen sind essenziell für den Betrieb der Seite, während andere uns helfen, diese Website und die Nutzererfahrung zu verbessern (Tracking Cookies). Sie können selbst entscheiden, ob Sie die Cookies zulassen möchten. Bitte beachten Sie, dass bei einer Ablehnung womöglich nicht mehr alle Funktionalitäten der Seite zur Verfügung stehen.